- Raytheon Anschütz Gyro Steering repeater, compatible with gyro compass STANDARD 20 - NMEA RS422, RS232, 4800 b/s - consists of: - Repeater Unit as seen in the picture - Connection Cable as shown

SN: 4403-2320 - Revolutionary Sat.-Compass/ heading sensor with advanced GPS technology ; Type: SC-50 - Tri-antenna system reduces the effect of pitching, rolling and yawing - Outputs in NMEA IEC 61162-1/2 or FURUNO AD-10 formats available - Consisting of: - Processor Unit: SC-501, SN: 4403-2320 - Antenna: SC-303, SN: 005430 (with 12m Cable) - Display Unit: SC-502, SN:...

SN: 101040701-929 - consisiting of: - ADPC-101 Analog-to-digital converter (Gyrocompass and log signals to NMEA) - The ADPC-101 is designed to digitize obsolete analog signals from gyrocompasses and logs into NMEA 0183 format and transmit converted data to the relevant navigation equipment. − Reception of current course value from gyrocompasses with synchro or stepper...

SN: 103010077 - consisting of: - Universal NMEA to Synchro Unit/ Converter SR03-01 - With SR03-01 there is no need to buy new repeaters and it is not required to reconfigure or replace ARPA Radars, Autopilots etc. - Therefore you will save time and money on installation and cabling. - SR03-01 converts serial NMEA HEADING data to Synchro signals

SN: 4020681001138 - consisting of: - Serial/Universal Step Converter - The serial/universal step converter converts serial heading information (NMEA or course bus) into step (6step / degree) signals - Needed if an old gyro compass with step output is replaced with a new Standard 22 gyro compass (to keep the existing equipment with step input, e.g. autopilots and steering...

SN: 5551 - NAVIGAT X MK 2 is a microprocessor controlled marine gyrocompass system - complies with IMO resolutions; MED ype approval - Gyro system remains north-stabilized during power interruptions of up to three minutes - Monitoring and alarm functions - Control and display unit (not removable) in front cover - consisting of: - NAVIGAT X MK 2 Master Compass

SN: 15121 - Tokimec / Tokyo Keiki Gyro Compass full System ES-160 - Master Compass - without bottom cable cover

Single unit gyrocompass system NAVIGAT X MK 1 HSC, Mod. 7, for special applications such as tugs, AHTS, sailing yachts, with high roll and pitch and/or high speed crafts, acc. to IMO resolution A.821(19), for connection to 24V DC (18-36V DC) and 115/230V AC, with automatic static and dynamic north speed error correction, power failure and system alarm, fully automatic...

IMO Approved Very low RPM reduces wear and increases lifetime Swappable sensitive elements for onboard service Sensitive elements require no annual servicing No oil change and quick installation

Repeater 360/10° Scale NMEA / Lehmkuhl

Digital Gyro Repeater

including: - Master Compass - Power Transmition Unit PT4

complete Gyro with Sphere

compatible with: - Anschütz Std. 6 - Anschütz Std. 14